One record for the whole run
The Traceability Pack is what ties our products together. Because the machine, tool and material are one integrated solution, the machine already knows what it is running — the Pack captures it, run after run, with no clipboard in sight.
Every parameter, cycle and alarm, the material and its lot, the operator, the exact time and date — logged automatically and sealed into a secure cloud record you can search, open and print for any production run.
Six things, on every run
Captured at the machine as it happens — contemporaneous, attributable and time-stamped, so the record is complete without anyone writing it down.
Temperature, pressure, dwell and the loaded recipe — the settings the run actually used.
Cycle count and timing across the run — how much was made and when.
Every alarm and event with its cause and timestamp — nothing quietly cleared.
Material type and lot — read from the scanned bundle, tied to the run.
The operator who ran it — identified by login or keycard, not a shared account.
Machine time-stamps on start, stop and every event — the spine the record hangs on.
Correct by default
The Pack doesn’t just record what happened — it checks the run is set up right before it starts. Three things are confirmed automatically, so the wrong combination simply can’t run.
The machine detects every tool part fitted and validates that the correct tooling is in place for the job — before the first cycle.
Our material bundles are scanned automatically — the right material and lot are confirmed and bound to the run, with no manual entry.
Our materials →The operator signs in by login or keycard, so every run is attributable to a named, authorised person — never a shared account.
Right tool, right material, right person — checked and logged at the start of every run, automatically.
Logged to a secure cloud — searchable and printable
Data streams from the machine into a secure cloud as the run happens. From any browser your team can find a run, open its full record and print it — for a customer, an auditor or your own release paperwork.
Built on the data-integrity principles behind electronic records and audit trails (e.g. 21 CFR Part 11 / ALCOA+). Applicability to your regulatory obligations is confirmed with your quality team.
A production run record
This is what you open and print for any run — the whole story of one batch on one page. Illustrative example.
A subscription, with a machine add-on
Two parts: a one-time add-on that gives the machine tool detection, material scanning and secure login — and a subscription for the cloud where every run is stored, searched and printed.
One-time, per machine. Fitted new or retrofitted to a supported line.
Ongoing, per site. Scales across machines and lines.
Tell us your machine and sites — we’ll confirm the add-on fit and scope the subscription.
Add-on fit depends on the machine — we confirm compatibility for your line as part of the enquiry. Pricing is quoted per project.
Traceability FAQ
Do I need an InnovaPax machine?+
The Pack relies on the machine detecting tooling, scanning our material bundles and authenticating the user, so it’s built for our integrated solution. The add-on can be fitted to a new machine or retrofitted to a supported line — tell us what you run and we’ll confirm fit.
How is the material lot captured?+
Our material bundles carry a scannable label. The machine reads it, confirms the correct material and lot for the job, and binds it to the run — so the record shows exactly which lot made which batch, with no manual typing.
Is my data secure and private?+
Records are stored in a secure cloud with access limited to your named users and roles. Entries are write-once and time-stamped, following the data-integrity principles behind electronic records and audit trails. Your production data is yours.
How does it relate to validation?+
Validation proves the recipe and sets the limits; the Traceability Pack then logs every run against them, so you can show each batch was made inside its validated window — the two work hand in hand.
Can I print records for an auditor or customer?+
Yes — open any run and print or export the full record, like the example above. Filter by date, tool, material lot or operator to pull exactly the runs you need for a release, an audit or a recall check.
The full service, end to end
Design, validation and traceability — three services that hand off cleanly from one to the next, all built on the same integrated solution.
From brief to a tool-ready blister or tray.
Open →FAT, IQ, OQ & PQ of the whole solution.
Open →Machine, tool, material and user — all logged.
You are here